Quik Scratch Eraser Kit #G190200-EU

• Use your drill to erase fine scratches, fingernail marks, scuff & paint transfer.
• Quick remover of light imperfections.
• Clear coat safe.

• ScratchX 2.0 4oz / 118ml
• 4" Scratch Eraser Drill-Mounted Pad
• Microfiber Towel 16"x16"( ̴41x41cm)

DIRECTIONS:

• CAUTION! Use ONLY on shiny paint finishes & clear coats.
• DO NOT USE ON MATTE OR SATIN FINISHES!
• Kit Limitations: Generally, if you can feel the scratch with your fingernail, it’s likely too deep to be erased with this kit and will require professional repair to replace the lost clear coat/paint material.
• IMPORTANT: Mount the Quik Scratch Eraser Pad into your drill following the drill manufacturer’s directions. INSURE THE PAD IS MOUNTED SECURELY.
• Always use both hands to hold/guide the drill, keeping the Quik Scratch Eraser Pad flat on the paint surface. Keep the pad & drill moving. Allowing the pad to remain in one place can overheat the paint finish & cause damage.

STEPS:

• STEPS

• SHAKE WELL

  . Use only on a clean, cool surface in the shade.
• Apply a small amount of ScratchX 2.0 to the Eraser Pad in an X pattern.
• Place the Quik Scratch Eraser Pad flat on the scratch & using medium speed, make 4-6 overlapping passes. Repeat as needed until the defect is no longer noticeable.
• Remove excess ScratchX 2.0 from the Quik Scratch Eraser Pad by pressing the pad into a clean, damp towel several times, then polish the affected area with 4-6 light, overlapping passes.
• Remove remaining residue with the microfiber towel.
• TIP: Follow with Meguiar’s® Ultimate Quik Wax® to quickly protect & beautify the newly corrected area, along with the rest of your car!