Hybrid Ceramic Wax #G190526-EU

• Advanced SiO2 (silicon dioxide)formula used in ceramic coatings
• Increased protection, durability and extreme water beading.
• Sophisticated hybrid ceramic chemistry uses a thick, high-viscosity formula & the power of your rinse water to help coat your car’s exterior surfaces.
• Ceramic made easy: Simply spray on, rinse off & dry!
• Beads water like crazy! You can actually see the extreme water beads form as you rinse!
• Easily boost your paint’s protection anytime you wash your car.
• Can be used over any traditional carnauba, synthetic wax, sealant or ceramic coating. This allows to “lock-in” the deep reflections produced by those waxes.

Directions:

• SHAKE WELL. The car should be cool to the touch and in the shade.
• Step 1 - Wash your car with any Meguiar’s car wash, following the directions on the label.
• Step 2 - After rinsing the vehicle thoroughly of all wash soap, spray Meguiar’s Hybrid Ceramic Wax over all exterior surfaces, while your car is still wet.
• Note: for initial application of Meguiar’s Ceramic Wax, skip Step 3 (second rinse) and go directly to Step 4 (dry), using a clean, dry towel for the initial wipe. This initial step “wax-as-you-dry” establishes a foundational layer of protection & beading and a base coat for future applications. The protection will be enhanced with subsequent product applications using the “wax-as-you-rinse” method.
• Step 3 - Starting at the roof, use a strong stream of water to rinse the whole vehicle a second time. The hydropower of this rinse will spread evenly the product, coating all the exterior with our Hybrid Ceramic protection.
• Step 4 - Dry the vehicle with a quality microfiber drying towel, like Meguiar’s SupremeDrying Towel (X1801EU/X1802EU) or Meguiar’s Water Magnet (X2000EU).